Skip to main content

Ontario · CSA Z769 & O.Reg. 153/04

Phase 2 Environmental Site Assessment in Richmond Hill

Ben Engineering offers Phase 2 Environmental Site Assessment (ESA) consulting in Richmond Hill, Ontario — with investigations performed under CSA Z769 and O.Reg. 153/04.

Standard
CSA Z769financing & due diligence
Regulation
O.Reg. 153/04RSC, rezoning, permits
Prepared by
Licensed P.Eng & P.Geo30+ years experience
Service area
Richmond Hill, ONand Southwestern Ontario

What is a Phase 2 Environmental Site Assessment?

A Phase 2 ESA is an intrusive investigation involving borehole drilling, soil and groundwater sampling, and laboratory analysis, typically conducted after a Phase 1 ESA identifies Recognized Environmental Conditions.

See our Phase 1 ESA overview for more. In Ontario, Phase 2 ESAs may follow CSA Z769 (financing, due diligence) or O.Reg. 153/04 (RSC filing, rezoning, MECP applications).

Industrial and Commercial Context in Richmond Hill

Richmond Hill's industrial base is comparatively limited, concentrated in light-industrial lands in the city's west end, reflecting its predominantly residential and commercial character within York Region.

Multi-Residential Development in Richmond Hill

Yonge Street and Major Mackenzie Drive form the spine of the city's high-density residential growth, with numerous condominium towers built or under construction along both corridors. Properties near these commercial and industrial corridors are the ones most likely to require environmental due diligence before financing, redevelopment, or a change of use.

Why This Matters for Properties in Richmond Hill

As with any Ontario municipality with an established industrial base, properties near Richmond Hill's commercial and industrial corridors are more likely to require a Phase 2 ESA when they change ownership, are refinanced, or are proposed for redevelopment to a more sensitive use such as residential.

How a Phase 2 ESA Is Actually Carried Out

WATER TABLE MW-2 MW-1 ACCREDITED LAB

Borehole locations are selected based on the Phase 1 findings, typically targeting areas of suspected historical spills, former tank locations, or drainage points where contaminants would be expected to accumulate.

Soil samples are collected at multiple depths from each borehole and screened in the field before being sent to an accredited laboratory, allowing the assessor to prioritize which samples warrant full laboratory analysis.

Environmental Site Assessment — Overview

Environmental Site Assessment overview video thumbnail

Environmental Site Assessment — Watch Video

Nearby areas we serve

Also servicing the surrounding region